Application: Emergency shower for horizontal mounting with auxiliary hand-held drench hose unit.

Shower Head: 10" diameter orange ABS plastic.

Valve: 1" IPS chrome plated pass stay-open ball valve. Valve is US-made with chrome plated pass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.

Drench Hose Unit: Auxiliary hand-held drench hose for rinsing eyes, face or body. Unit has single FS-Plus™ spray type outlet head, self-closing valve with squeeze handle, 8 ft. reinforced PVC hose and wall hook.

Pipe and Fittings: 1" IPS galvanized steel with orange ABS plastic elbow.

Supply: 1" NPT female inlet.

Sign: ANSI-compliant identification sign.

Available Options

• PCc All-polished chrome plated pass construction.
• SSh Stainless steel shower head
• GRN Safety green ABS plastic shower head.
• YEL Safety yellow ABS plastic shower head.
• PCH Polished chrome plated cast pass shower head.
• FC20 Regulates shower flow rate to 20 GPM.
• SC Self-closing ball valve. Note: Emergency showers with self-closing valves do not comply with ANSI Z358.1 - 2009.
• AP280-100 Electric Light and Alarm Horn. Flashing light and horn serve to summon assistance when shower is activated.
• TMV G3800 thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2009. Refer to Tempering Units section for complete technical and product selection information.
• AP250-015 Modesty curtain for horizontal shower installation.