Application: Eyewash for wall mounting. Two
GS-Plus™ spray-type spray heads deliver a flood of water for rinsing eyes. Unit is provided without bowl or drain for waste water. Note: Floor drain should be provided underneath unit to prevent accumulation of water on floor.

spray head assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

mounting: Heavy duty aluminum wall bracket with corrosion resistant powder coated finish.

construction: Polished chrome plated brass.

supply: 1/2" NPT female inlet.

sign: ANSI-compliant identification sign.

quality assurance: Unit is completely assembled and water tested prior to shipment.

Available Options

• DC Stainless steel dust cover for each spray head.
• HS Auxiliary hand-held drench hose for rinsing eyes, face or body.
• SC Self-closing ball valve. Note: Eyewashes with self-closing valves do not comply with ANSI Z358.1 - 2009.
• TMV G3600 thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as provided by ANSI Z358.1 - 2009. Refer to Tempering Units section for complete technical and product selection information.