Application: Free standing, pedestal mounted eye/face wash. Constructed entirely in stainless steel. Ideal for use in highly corrosive environments and clean room applications. Two large FS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes and face.

spray head assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

Valve: 1/2" IPS stainless steel stay-open ball valve. Valve has stainless steel ball and Teflon® seals.

bowl: 11 1/2" diameter stainless steel.

pipe and fittings: Schedule 40 stainless steel. Furnished with orange polyethylene covers on vertical piping for high visibility and corrosion resistance.

supply: 1/2" NPT female inlet.

waste: 1 1/4" NPT female outlet.

sign: ANSI-compliant identification sign.

quality assurance: Valve, bowl and spray head assembly is factory assembled and water tested prior to shipment.

Available Options

• BC Stainless steel bowl cover. Cover protects unit against contaminants. Cover is automatically raised
  when unit is activated.
• DC Stainless steel dust cover for each spray head.
• HFC Hand and foot control. Eye/face wash is activated by flag handle or foot treadle.
• TMV G3600 thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as provided by ANSI Z358.1 - 2004. Refer to “Tempering Units” section for complete technical and product selection information.