application: Dual purpose eyewash/drench hose unit for deck mounting. Unit meets the provisions of ANSI Z358.1 -2009 as both an eyewash and a drench hose. Unit may be left in the deck flange for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body.

spray head assembly: Two GS-PlusTM spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

valve: 1/2” IPS brass stay-open ball valve. Valve is U.S.-made with chrome plated brass ball and TFE seals.

hose: 8’ reinforced PVC hose. 300 PSI maximum working pressure. Note: Hose must be inspected at least monthly for indications of wear, abrasion, loss of flexibility or loosening of end connections.

mounting: Eyewash assembly has deck flange for countertop mounting. Flange has handle locator guide to position spray heads facing forward at all times.

supply: 1/2” NPT male inlet.

sign: ANSI-compliant identification sign.

quality assurance: Unit is completely assembled and water tested prior to shipment.

Available Options

• DC Stainless steel dust cover for each spray head.
• FSH 8 ft. flexible stainless steel hose in place of PVC hose.
• HG Undercounter hose guide bracket to prevent hose from tangling or binding.
• BP In-line dual check backflow preventer installed on inlet of hose. Note: Check with code authority for compliance with local plumbing code.
• TMV G3600 thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as provided by ANSI Z358.1 - 2009. Refer to Tempering Units section for complete technical and product selection information.